The Silent Hill Townfall X-Ray puzzle has you taking X-Rays of a patient's skull and chest. You'll need to align the machine and find the correct kV, mA and time settings to get it to work, using some instructions and a table to understand what to do. Like the Townfall blood pressure, pulse and O2 puzzle before this, there is a lot to read and try to keep in your brain as you fiddle with machines. Below is the short version to help you get through it all quickly.
The first thing you'll need to do when taking an X-Ray is turn the computer on and move the image up to find the skull, as shown above. You won't see the head as it's under the cloth but you'll see some small white squares you can align with the camera image. You'll know you're in the right place when it says Patient Skull - Aligned. Now you need to turn the X-Ray machine on using the power switch on the control panel but before you can do anything else you'll need to check the X-Ray Dosage Table on the laptop in the other room. That will give you these figures:
To X-Ray the skull you now need to set the various dials on the control panel to these values for the skull:
That should look like this on the panel itself:
If you've got it all set up right you can then press the green X-Ray button to take the picture and trigger the next stage.
With the skull X-Ray taken you'll now have to take a picture of the chest. Use the camera again to first to move the machine down and align its view with the lower set of white squares around the panel with the wire going in, as shown above.
Now, using the X-Ray Dosage Table from the laptop, you want to set the dials to these values:
هەفتانە هەرسکردنەکان، چیرۆکەکانی ئەو کۆمەڵگایانەی کە خۆشت دەوێن و زۆر شتی تر
سەرچاوەی فەرمی بە زمانی ئینگلیزی: https://www.gamesradar.com/games/silent-hill/silent-hill-townfall-x-ray/
