The first part of the Power Lines quest in Control Resonant will have you travelling to three subway stations to solve an obtuse puzzle.
These puzzles involve tuning forks and placing them in the correct locations. Once you complete all of them, you’ll be warped to the mysterious Vanished Station.
In this guide, we’re breaking down how to solve the Perimeter Station, Factory Station, and East Park Station subway platform tuning fork puzzles. If you’ve already completed these, make sure to check our Vanished Station Platform A and B puzzle guide.
In Perimeter Station, you’ll need to find three tuning fork devices and place them in the correct areas, which are marked by yellow tape.
After descending the stairs onto the platform, immediately turn left onto the tracks to find the first device under the stairwell. Heading up the stairs opposite to those you descended will reveal another device. The third device you need is at the end of the train line behind a door that requires a generator to be powered. Take the power from upstairs down the line to reveal the third device.
You need to place the three devices at the top of the stairs opposite to where you enter, on the square closest to the tuning machine, and upstairs inside the small shop that requires power to enter.
Activate the machine when all three forks are in place, and you’ll have rerouted the Perimeter Station.
Factory Station has a similar puzzle to Perimeter Station, but it’s very simple to complete once you find the tuning forks.
سەرچاوەی فەرمی بە زمانی ئینگلیزی: https://www.videogameschronicle.com/guide/control-resonant-power-lines-perimeter-factory-and-east-park-station-puzzle-solutions/
